PH 13-8 Mo* stainless is a martensitic precipitation/age-hardening stainless steel capable of high strength and hardness along with good levels of resistance to both general corrosion and stress-corrosion cracking. In addition, the alloy exhibits good ductility and toughness in large sections in both the longitudinal and transverse directions. The excellent properties of PH 13-8 Mo stainless are obtained through close control of chemical composition and microstructure plus specialized melting which reduces impurities and minimizes segregation. Compared to other ferrous-based materials, this alloy offers a high level of useful mechanical properties under severe environmental conditions.
13-8 Mo stainless has good fabrication characteristics and can be age-hardened by a single low temperature treatment. Cold work prior to aging increases the aging, especially for lower aging tempratures.
13-8 Mo stainless has been used for valve parts, fittings, cold-headed and machined fasteners, shafts, landing gear parts, pins, lockwashers, aircraft components, nuclear reactor components and petrochemical applications requiring resistance to stress-corrosion cracking. Generally, this alloy should be considered where high strength, toughness, corrosion resistance, and resistance to stress-corrosion cracking are required in a steel showing minimal directionality in properties.
*PH 13-8 Mo stainless is a registered trademark of Armco Inc.
|CURRENT BAR INVENTORY|
|Alloy 13-8 SUPER TOUGH (AMS 5934)||1.010 DIA X 140" RL|
|Alloy 13-8 SUPER TOUGH (AMS 5934)||1.260 DIA X 131-148" RL|
|Alloy 13-8 SUPER TOUGH (AMS 5934)||1.510 DIA X 144" RL|
|Alloy 13-8 SUPER TOUGH (AMS 5934)||2.010 DIA X 101-109 RL|
|Alloy 13-8 SUPER TOUGH (AMS 5934)||2.510 DIA X 99-109 RL|
|Alloy 13-8 SUPER TOUGH (AMS 5934) - DUE DATE: 01-16-23||3.020 DIA X 140" RL|
|Alloy 13-8 SUPER TOUGH (AMS 5934) - DUE DATE: 11-26-22||3.520 DIA X 140" RL|
|Alloy 13-8 SUPER TOUGH (AMS 5934) - DUE DATE: 11-25-22||4.020 DIA X 140" RL|
|CURRENT FLAT BAR INVENTORY|
|Alloy 13-8 SUPER TOUGH (AMS 5934) - DUE DATE: 01-06-23||4.020 X 10.020 X 144 RL|
102.108MM X 254.508
|Alloy 13-8 SUPER TOUGH (AMS 5934) - DUE DATE: 01-06-23||5.020 X 12.020 X 144 RL|
127.508MM X 305.308